Bally

Butcher Block: Cleaning and Care Tips

Posted on 02/15/2012 at 3:39pm

Six Steps to Maintaining a Safe and Sanitary Butcher Block Surface:

  1. Remove large food scraps by wiping the cutting surface clean with a wet cloth or sponge.
  2. Clean the cutting surface with a disinfecting solution of 1 teaspoon of bleach to 1 quart of water. DO NOT use powder or abrasive cleansers.
    Tip: mix and store bleach solution in a spray bottle for future use.
  3. Wipe or sponge off bleach solution with clean warm water. Repeat rinse. For butcher block cutting boards: DO NOT submerse in water or run through a dishwasher.
  4. When dry, seal the block with Emmet’s Elixir anti-microbial beeswax and mineral oil wood conditioner or USP-grade mineral oil. Apply liberally to all surfaces.
  5. Wipe excess and buff with a soft cloth in the direction of the grain. 6 Reseal butcher block cutting surfaces at least once a week, depending
    on amount of use.

For butcher block cutting boards: Store in a rack or on edge to keep dry and inhibit bacteria growth. To avoid cross-contamination, use one board for meats and another for vegetables. Or consider a reversible board, using one side for prepping meats and the other for vegetables.

Source: Bally Block Co. Website

Filed Under: Bally

How Green is Your Countertop?

Posted on 02/15/2012 at 3:31pm

Michigan Maple Block uses lumber which is harvested form sustainable forests within a 200 mile radius of the manufacturing facility. It uses a process called finger-joining. This allows us to use short pieces of wood which otherwise would be discarded. In effect recycling the raw material into a useable item to be manufactured into our product line. This finger joint material represents approximately 30 % of our lumber usage. It should also be noted that cartons we pack our products in are made from 30.2 % recycled and 28% post consumer recycled product. Michigan Maple Block also purchases used pallets to continue the recycling process.

The coatings meet the GreenSure criteria: 2.3 lbs/gal VOC or less. 100 % solids. For- maldehyde Free, Lead Free, Chromate Free, HAPS Free. Additionally, we reclaim the finish in the roll coat- ing process, which falls in line with the GreenSure approval parameters.

Learn more at Bally Block Co. website:
http://www.ballyblock.com/detail/useful-documents-41/

Filed Under: Bally